optional end shrouds for blind mating low pro le (1,70mm) .067" (0,80mm) .0315" micro pitch choice of post heights surface mount fte?150?01?g?dv fte?136?01?g?dv fte?120?01?g?dv www.samtec.com lead style plating option no. pins per row 1 fte ?g = 10" (0,25m) gold on post, gold ? ash on balance 05 thru 90 flex-shroud options ?p option ?tr option ?es option mates with: cle other option style ?01 ?dv only (11 pins/row min.) ?es = end shroud ?ec = end shroud with locking clips ?ep = end shroud with guide posts for complete speci cations and recommended pcb layouts see www.samtec.com?fte insulator material: black liquid crystal polymer terminal material: phosphor bronze plating: au over 50? (1,27?) ni current rating: .75a @ 80? ambient operating temp range: -55? to +125? rohs compliant: ye s processing: max processing temp: 230? for 60 seconds, or 260? for 20 seconds 3x lead-free solderable: ye s -dv lead coplanarity: (0,10mm) .004" max -dh lead coplanarity: (0,10mm) .004" max (05-25) (0,15mm) .006" max (26-50) note: some lengths, styles and options are non-standard, non-returnable. ?es option (3,05) .120 (1,20) .047 (0,80) .0315 (0,30) .012 sq a (1,70) .067 (4,57) .180 (3,18) .125 (1,38) .055 (4,17) .164 (5,08) .200 x (3,18) .125 no. of positions x (0,80) .0315 + z (4,09) .161 180 179 02 01 no. of positions x (0,80) .0315 a (2,29) .090 (5,08) .200 ?p option (shrouded options removed for clarity) (0,80 mm ) .0315" header specify lead style from chart tail option ?dv = dual vertical ?dh = dual horizontal (50 pos. max.) ?dh option ?a = alignment pin (5 pos. min.) metal or plastic at samtec discretion (?dv only) ?k = (2,50mm) .098" dia polyimide film pick & place pad (?dh only) ?p = plastic pick & place pad (8 pos. min.) ?dv only ?tr = tape & reel packaging f-209 fte series options option ?es ?ec ?ep z (1,57) .062 (4,11) .162 (5,51) .217 ?01 ?02 ?03 (1,90) .075 (4,45) .175 (3,05) .120 lead style a end shrouds with board locks and gold ash plating available. call samtec. application specific option specifications
|
